Equinox Systems Krypton EQLED21 Guide de l'utilisateur télécharger pdf (Page 10)

Device Profile Files

For each device and device manager (except AirPlay devices), there must be a

separate profile. A profile is a text file with the extension .dmp, which is opened

and parsed at start-up. In addition to user-configurable formation, this file must

contain the operational name of the device manager and the network name of the

BCS computer. The profile can have any name, but it is recommended that you

use the name of the device manager.

Multiple instances of any device and its device manager can be run on BCS by

launching each with its own .dmp file. Whenever you add a device or change its

speed or location, you’ll need to create or modify the appropriate device profile.

Text is case-insensitive. Device profiles are located in the BCS install directory:

program files/avstar systems/broadcast control system

Format of the profile file is the same as any Windows .ini file, with the syntax

<key> = <value>, and sections for Configuration, Communications,

Channels, Dictionary, and CG Character Mapping.

Setting up the Louth VDCP DM

Hardware Requirements

To install and run the Broadcast Control System, you’ll need the base equipment

detailed on the following table. For a list of qualified PCs, contact your Avstar

dealer or call Avstar Technical Support at:

1-800-547-8949 in the USA

44-1753-655999 in Europe

65-476-7666 in Asia/Pacific

For information about hardware installation and system preparation, see the

AvidNews (Avstar) Site Preparation Guide.

Device Manager Computer

In a typical setup, the Louth VDCP Device Manager (DM) will run on the same

computer as the BCServer. Therefore, hardware requirements are identical to

those used for the BCServer.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Pas de commentaire

Equinox Systems Krypton EQLED21 Guide de l'utilisateur Page 10