Equinox Systems GEMINI Guide de l'utilisateur télécharger pdf (Page 26)

User Guide V1.10

1 In GEMINI select <Options> <Create Library Info>

This operation interrogates the target programmer and generates a ‘notepad’ document

which details information about your programmer and generates a list of devices

supported by the programmer. From the list you can see which ‘TARGET ISP’ devices can

be programmed with the GEMINI-1. i.e. only devices listed as ‘yes’ or LNR’ are supported.

2 Select your target device from <Device><Select>...

In our example this is <Temic><T89C51Rx2>

Warning!

The programmer applies +12V to the Vpp pin of the target

microcontroller if a Philips P89C51Rx+ device is selected by

mistake.

This could cause damage to both the target microcontroller

and target system.

3 From the <Device menu>, select<Information>

This will give you a description of the target device.

Note:

If you are using different reset timings to the default

settings refer to Target Settings section, page 23

TEMIC Device Programming Guide

The GEMINI-1 Programmer is now ready to program a target device.

In the following example we have chosen to program a TEMIC T89C51RD2 microcontroller

on the user target system.

Figure 14

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 57 58

Pas de commentaire

Equinox Systems GEMINI Guide de l'utilisateur Page 26